Aerospace Engineering With Pilot Studies With A Year In Industry Beng (hons) in University of Liverpool, UK

Aerospace Engineering With Pilot Studies With A Year In Industry Beng (hons) in University of Liverpool

TThis programme is very similar to that of the Aerospace Engineering degree programmes (H425 and H421) but also introduces elements of pilot studies for students interested in becoming pilots.

In Year One, the Pilot studies module (based on the PPL ground school syllabus) complements the flight training programme of 20 hours which is mandatory. In Year Two, the Pilot studies module is based on the Air Transport Pilot’s Licence (ATPL) ground school syllabus.

An additional fee of approximately £3,400 is required to cover the costs of the mandatory 20 hours pilot training.

Year One students study core engineering topics such as Structures; Fluid Mechanics; Thermodynamics; Materials; Maths; Electronics and Management. The Year 1 Pilot Studies modules provides a first insight into this exciting career This, alongside general engineering skills such as technical drawing and communication is reinforced throughout the year via a design-build-test project where students are required to demonstrate their learning by creating an unmanned glider aircraft for use in a humanitarian mission.

In Year Two, you will take modules in Aeroengines; Avionics; Computer Programming; Maths; Dynamics; Structures; Design; Aircraft Performance and Project Management. The pilot studies modules are based on the material required in the Air Transport Pilot’s Licence (ATPL) ground school syllabus.

In Year Three you will undertake an individual project providing the opportunity to conduct research and develop innovative concepts in your preferred technical area of interest.

You will also take modules in Aerodynamics; Flight Dynamics and Control; Aerostructures; Aeroengines; Avionics; Aircraft Design and Management. You can take optional modules in topics such as Spaceflight and Rotorcraft Flight.

Work placement/Year in industry

Students are encouraged to gain relevant work experience to enhance their employability by applying for a summer internship or a year placement with an approved company/organisation. The School of Engineering MEng and BEng with a year in industry programmes are available to all* students. Whilst the School of Engineering and the University will provide the necessary support and guidance, it is the responsibility of the student to secure an industrial placement. Applicants should note that industrial placements are highly sought after and competition to be accepted into one can be significant. They therefore cannot be guaranteed. Students who fail to secure a suitable placement offer will transfer back to the standard version of the programme without a year in industry.

Know more about Studying in UK

Tuition Fees in UK (1st Year Average)	MS: £17276 | MBA: £17276 | BE/Btech: £16632 | BBA: £15130 | BSc: £16632 | MFin: £19000 | MA: £15560 | MIM: £18241 | MEM: £16950 | MArch: £14271 | BHM: £12662 | MIS: £15344 | MEng: £12876 | MBBS: £28865| MPharm: £15452
Average Accomodation & Food Costs in UK	£850 to £1,050 a month
Entrance Exams in UK	TOEFL: 88 | IELTS: 6.5 | PTE: 59 | GMAT: 590
Work and Study in UK	Permitted for 20 hours/week with a valid study permit.
Post Study Work Permit in UK	2 Year after graduation depending on the course.
Cost of Student Visa in UK	£348
Student Visa in UK	Your nationality, duration of your stay and purpose of your stay are the three essential factors for UK visa. For Non-EU students UK visa is mandatory.
Intakes in UK	There are mainly two intakes in UK: January/February & September/October.
Top Job Sectors in UK	IT Engineering, Product Design, Mobile Development, Designers, Logistics, etc.
Economy in UK	Growth Rate: 1.3% (2018) 1.4% (2019) 1.4% (2020e), 6th Largest Economy in the World by Nominal